Pur Fill Cold Weather Foam 1G CW01 - Case of 12

This low expansion Pur Fill Cold Weather 1G foam is used to seal and prevent air leaks air, water, gases, odors, fibers, pests, rodents, sound, dust, and radon into a home or building. In addition, this foam limits the places where insects can come in. This foam is a closed cell formula that is applied with a foam gun. One can of this foam creates cured foam measuring 2,200 cubic inches. Also, it provides 960 linear feet of 1/2-inch bead. Within ten minutes the foam is tack-free, and within thirty minutes it is trimmable. Pur Fill Cold Weather foam reduces foam consumption by 25 percent compared to foam that is dispensed through an aerosol valve.

NOTE: The Pur Fill Cold Weather Foam 1G CW01 does not include an application gun. The foam gun may be acquired as a separate purchase (see related products).

• Coverage: 15 board feet
• Color: Yellowish
• Expanded Volume (free rise @ 68 deg. F Relative Humidity): 10 gallons/can or 1.3 cubic feet
• Density: 1.2 pounds per cubic foot
• Cell Structure: Excessively closed, approximately 80%
• Compression Load Deflection (10% compression): 8.5 pounds per square inch
• Minimum Can Temperature: 40 deg. F. (5 deg. C.)
• Minimum Surface Temperature: 32 deg. F. (0 deg. C.)
• Temperature Stability of Cured Foam: -40 deg. F to +176 deg. F(-40 deg. C to +80 deg. C)
• Tack-free @68 deg. F (20 deg. C) Time: 10 minutes
• Cuttable Time @68º F (20º C) Time: 30 minutes
• Flammability test ASTM E 84: Flame spread index: 25, Smoke density: 210, Class 1: fire rating construction
• Thermal resistance: R factor ASTM C 518: 6.0/inch
• Origin: Germany

Additional Information: Material Safety Data Sheet (pdf)
Additional Information: Safety Data Sheet (pdf)

NOTE: This item is non returnable and no credits can be issued. Also, due to the chemical nature of this product, this item cannot ship outside of the 48 contiguous US states.