Description
Product description
This product is a great versatile alterntive to 2 part spray foam kits. Get all the benefits of 2 part closed cell spray foam in a can!
A Polyurethane based insulation spray foam for high quality heat and sound insulation in buildings and many more. Provides a matchless, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards (EPS&XPS), glass wool and rock wool.
Includes two nozzles specifically designed to apply the Kraken Spray Foam. Nozzle A is used for vertical application that provides wedged spray and Nozzle B is for ceiling applications.
Application Temperatures
- Can Storage Temperature: min. 41°F max. 86°F.
- Temperature Resistance: -103°F to 239°F.
- Application Temperature: 41°F to 86°F.
- The cans should be kept at room temperature for at least 12 hours before the application if cans are stored below/above storage temperature.
Properties
- Outstanding adhesion for most building materials,
- Easy to apply uneven, hard-to-reach surfaces where it is very hard to use traditional insulation materials,
- Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K),
- Does not allow the formation of thermal bridges.
- Does not allow the formation of dew points.
- Yield up to 20 board feet with 1-inch thickness if applied from a distance of ~16 inches with normal application speed,
- Thanks to its dense structure, it stops water, air, bugs, etc.
- Can be painted.
Application Areas
- Structural elements of buildings, attics, crawl space, interior wall insulation, balcony, loggia, doors, window slopes, pipes, canals, and tank kind round surfaces, uneven and rough all surfaces,
- Roofs, attics, facades, foundations, basements, floors, interior walls, inter-floor overlappings, interior partitions, ceilings, and cellars
- Car body and car trailers, boats, yachts, vessels, and all kinds of sea vehicles.
- Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K), Yield up to 20 board feet with 1-inch thickness if applied from a distance of ~16 inches with normal application speed
- A maximum of 1-inch thickness should be applied in a single batch. If more than 1-inch thickness application is needed, a minimum of 30 minutes should have waited between each surface, and the surface should be sprayed with water before the next application.
